Challenge MS-5 Multi-Spindle Drill
- Multi-Hole Drilling - up to 5 Holes
- Side Guide Adjustments
- Backgauge Adjustments
- Easy Drill Length Adjustment
- 2" Hollow Drill Bits Available in 13 sizes
- 2-1/2" Hollow Drill Bits Available in 4 sizes
- Hollow Drill Bits Also Available With Teflon Coating
Specifications |
| Number of Drill Heads |
2 to 5 Heads |
| Drill Sizes Available (2" capacity) |
1/8" to 1/2" / 3 to 13 mm |
| Drill Sizes Available (2-1/2" capacity) |
1/4" to 1/2" / 6 to 13 mm |
| Center to Center Distance Maximum |
15" / 38 cm |
| Center to Center Distance Minimum (standard) |
1-7/8" / 48 mm |
| Center to Center Minimum (optional narrow heads) |
1-3/8 / 35 mm |
| Maximum Drilling Capacity |
2-1/2" / 63 mm |
| Strokes per Minute (adjustable) |
Up to 18 |
| Backgauge Adjustment |
0 to 5" / 0 to 13 cm |
| Vertical Adjustment of Individual Heads |
1/4" / 6 mm |
| Table Size |
17-3/4" x 34" / 45 x 87 cm |
| Table Height |
37" / 94 cm |
| Overall Height |
56" / 142 cm |
| Floor Space Needed |
36" x 36" / 92 x 92 cm |
| Net Weight (approximate) |
830 lbs / 374 kg |
| Shipping Weight (approximate) |
910 lbs / 410 kg |
| Standard -
1 Phase, 60 Hz, AC. Pump: 1/2 HP. Spindle Motor: 1-1/2 HP.
208/230 Volts, 18 Amps (service size 30 Amps) |
| Optional -
3 Phase, 50 Hz, AC. Pump: 1/2 HP. Spindle Motor: 1-1/2 HP.
208/230 Volts, 12 Amps (service size 20 Amps) |
|
Challenge reserves the right to make changes to any
product or specification without notice and without incurring responsibility
to existing units.
|
|
Challenge MS-5 brochure pdf file
Download the brochure and call 877.460.1212 toll free to speak to a sales representative.
